Port Information

adTempus uses the TCP protocol for communication between the client and the server. The server listens on port 3760; the client uses a dynamically-assigned port.

If you are using remote administration and your server is behind a firewall, you will need to make sure that the firewall is configured to allow incoming connections on port 3760.

Changing the Port

If for some reason you need adTempus to use a different port, you can do so as follows:

  1. Using the Registry Editor, locate the key HKEY_LOCAL_MACHINE\Software\Arcana Development\adTempus.

  2. If this key does not have a subkey named Options, create one.

  3. Under the Options key, create a new string (REG_SZ) value called "Server:Port". Set this value to the port number you want to use. Important: the registry value must be a string value, not a DWORD value.

  4. You must restart the adTempus service for the change to take effect.

For clients to connect to the server, you must specify the correct port number:

  1. From the File menu in the Console, select Connect Server...

  2. In the Connection Properties window, select Connect to a remote computer. Note: You must select this option even if you are connecting to the local computer, because you need to be able to override the address for the server.

  3. Specify the name or address of the server, followed by a colon and the port number. For example: